See What Ghost Immobiliser Tricks The Celebs Are Making Use Of

Why You Need a ghost immobiliser fitter 2 Immobiliser Fitting Near Me

Modern thieves can steal a vehicle in under a minute. They use the cars OBD port to hack into the ECU & then duplicate a new key, all from a laptop hidden in the car.

An Autowatch ghost immobiliser for sale immobiliser stops this by transferring a sequence of pin codes through the existing buttons in your vehicle (steering wheel & central console). It is completely invisible to anyone else in your car.

There are no key fobs or LED indicators or other ways of locating the vehicle are in place.

If you're looking for a solution to stop keyless entry theft or key cloning then look no further than the ghost immobiliser. This device shields your vehicle from these kinds of attacks by blocking the engine after the proper pin code is entered. This is a reliable method to safeguard your vehicle. Insurance companies for cars recognize it as a security feature that can reduce the cost of insurance.

The way that the ghost operates is by connecting to your vehicles CAN data network. Once installed by us at Car Theft Solutions it will only begin when you press the specific sequence of buttons with your unique override code. This means that any attempt to start the vehicle without entering this code will be met with a loud siren, and the engine won't start. The thief will then realize that they have been taken prisoner and will likely leave the vehicle.

This system has the advantage of not transmitting any signals like a tracker. Thieves can't utilize RF receivers to determine your ghost immobiliser installers near me device's location. It also does not transmit any IR (infrared) signals, like the standard remote key fobs to control the device or tracker do, making it difficult to deceive or hack.

The Ghost also has the valet-mode, which is activated if you are transferring your vehicle over to an individual for parking or service. This will disable the immobiliser can for 30mph and permit you to use your vehicle in normal fashion using your key fob. When the vehicle is parked up again, the Ghost will be restored to full function.

If you'd like to find out more about the Ghost immobiliser or want us to install it in your vehicle, please contact us at Car Theft Solutions today. We are a dedicated family run business with over 10 years of experience in security for vehicles including the Ghost immobiliser installation. We are a Thatcham-approved installer for Ghost products and our reputation is built on customer satisfaction.

No hacking, cloning, or cloning

The Autowatch Ghost immobiliser is one of the most advanced models available. It safeguards your vehicle from hacking and key cloning which makes it almost impossible to steal. The only method to steal your car is to physically remove it. Even then, they wouldn't be able to start the engine.

This is due to the fact that unlike other immobilisers that only stop your vehicle from starting if you do not have a fob, the clever system actually shuts off the engine control unit to prevent the vehicle from starting. It works by sending a signal through buttons on your steering wheel, door panel or centre console that can only be disarmed by entering the correct pin code configuration, it is this feature that makes the Ghost difficult to break.

Its sleek and discrete design allows it to fit into your vehicle seamlessly with no additional keys or LEDs It operates on its own, independent of your factory alarm or tracker. It is also a CAN bus immobiliser, which means it is part of the control area network of your vehicle and does not interfere with any other devices such as your vehicle's key fob or alarm.

This exclusive technology is not detectable by thieves and other systems that use codes and RF scanning. It simply sends a series of pin codes that are silently transmitted through the buttons on your vehicle's steering wheels, door panels, or central console. The Ghost is a groundbreaking product that safeguards your vehicle from theft of keys that are keyless and smart key theft. It does this by creating a unique pin code, that must be entered to disable the device.

With the increase in keys-less entry vehicles on the road the thieves are becoming more sophisticated and using cloning equipment that can be bought on the internet or in the classifieds for less than PS15. The cloned key fob could be used to gain access to the vehicle. The standard immobiliser can only stop the vehicle from starting if the criminal has the original key fob. This is not enough security, and it's easy for criminals to jam or fake signals to unlock the vehicle.

Valet mode

An immobiliser that is standard on your vehicle is an electronic chip which sends the signal when you press your key fob button, the system then searches for the particular code you have sent from the key to start the car. If the signal isn't received, the system will cut off and stop the engine from getting started. This is the basic principle behind all aftermarket car immobilisers. It is a vital measure to safeguard your car from being stolen, even if someone has your keys or a device that could increase the signal from your key fob.

But a Ghost Immobilise immobiliser doesn't just stop it but it also goes a step further. The system, located on the CAN Bus of your Mercedes, has been programmed with a unique PIN code that has to be entered to start the vehicle. This is then locked on your app, and no one can ever access it unless they have the same pin that you have.

The system will also prevent hacking, cloning and signal jamming (which could be used by thieves to get around the immobiliser in your vehicle). If a thief manages to get their hands on the keys to your car or fob, they will not be able start your vehicle even if it is parked nearby. The only way for them to get your car away would be to physically take it away in a flatbed lorry which is extremely unlikely.

Valet mode is a useful feature that comes with your ghost immobiliser. When activated, the glove box of your car and trunk will be locked, so that anyone who steals your car will not have any personal items to carry with them. It will also limit the speed of your Tesla so that it cannot be driven more than 70mph. It will also disable absurd modes. It will also block your driver profiles and hide your home / work addresses so that no one else has access to the private information on your Tesla dashboard.

If you wish to use your vehicle for valet parking or service purposes, just select the 'Valet/Service' option on your dashboard app and then enter your 4-digit valet pin on the touchscreen. The alarm will no longer work, however the car won't start unless you enter an authentic pin. This is a great option for those who have to hand their car over to others, such as taxi drivers or garage mechanics.

The first-ever aftermarket CAN bus immobiliser

The Autowatch Ghost is the first aftermarket CAN bus immobiliser and provides security unmatched by any other product available today. It safeguards you from key cloning or hacking, and even theft of keys. It does this by working with your vehicle's current interface. It does not use additional fobs or remotes but integrates into the vehicle's CAN data network. This makes it a 'stealth' device.

The device is an invisible circuit board that connects to your car's engine management system (ECU) and works silently. Once activated it will prevent your vehicle from starting until specific PIN is entered. This is the unique number you will receive when you make an appointment to install. This number will be required to activate valet mode, deactivate the alarm, or allow you to drive away in the car of a friend (if they have a Ghost installed as well).

It is designed to be invisible from the interior of your vehicle. It doesn't emit radio signals, but it does emit makes sounds when it is activated. It can be installed in a variety of locations and is nearly impossible to detect. It is also low-maintenance and can be fitted in conjunction with other systems such as a tracker (Brand dependant) to offer an all-inclusive anti-theft solution.

Many people choose to fit a audi rs6 ghost installer immobiliser because they feel that standard security isn't enough to protect their joy and pride from being taken. Physical deterrents such as wheel clamps and steering wheel locks are great alternatives, but they're not considered "theft-proof" by thieves as they can be easily defeated with the right tools. A ghost immobiliser can't, however, be beaten by a burglar as it is covertly integrated inside the vehicle. Its activation activated, it would shut down parts like the starter motor or fuel system.

The most appealing aspect is that a ghost immobiliser can be installed for as low as PS450, which is a tiny fraction of the cost of other products out there - and it actually does protect your vehicle from being stolen! If you want to add a layer of security to your car's pride and joy call us today to make sure we can book it in for you. We accept credit cards and provide a three-month, interest-free credit through Klarna.