Beware Of This Common Mistake You re Using Your Upvc Window Replacement Hinges
Choosing Upvc Window Replacement Hinges
The process of selecting and fitting upvc window hinges for replacement isn't as difficult as you may think. Make sure that the hinges' arrows face the right way and measure the thickness of the hinge arms on the frame that opens (13mm or 17mm).
There are a variety of different kinds of hinges, each with their distinct characteristics. This article will review some of the most commonly used uPVC hinges, as well as their advantages.
Egress/Easy Clean Hinge
They are an excellent choice to replace or upgrade the fire escape safety window since they can be opened at a 90-degree angle. They can also be lowered into an 'easy clean' position so that you can easily reach the outside of windows to clean them without climbing a ladder or lean over at angles that could be dangerous.
These heavy duty egress hinges are manufactured by Yale one of the most known and trusted home security brands available today. They can be used with all kinds of uPVC side-hung windows. They can be moved to the easy-clean position by pressing an unassuming button, and then sliding the window sash to one side. When the sash is closed, it will be reset to its original position.
They are available in both 13mm and 17mm stack heights. Use our Egress Selection Guide to help you determine the best product for your window friction hinges.
These hinges are designed to be used in conjunction with a standard side-hung frame which is made of aluminum or upvc door hinges. The friction screw is used to adjust the resistance. This makes opening the window simpler and less likely of a mistaken closing in strong winds. They have been tested for more than 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
With no buttons or catches There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is simple to operate and offers a practical solution for emergency egress and secure cleaning. First, open the window hinge repair cost to the egress (full opening) position, then press the hinge retaining clip that is located on the inside of the bottom corner. This will open the bottom and top catches which will allow you to move the sash back into the clean position. Close the window hinges repair near me once you have the sash in the easy-cleaning position. This will reset the hinges to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace windows that open sideways for egress (fire safety) reasons. These types of window hinges open more wide and faster than standard hinges to allow a large clear opening to escape in the case of an emergency fire. Building regulations require that this type of hinge must be installed in any room that has windows.
The windows feature a friction stay that allows the windows to open up to 90 degrees. They also let the opening sash to slide across the glass when it's opened, allowing for easy cleaning without having to use ladders. The hinges are easy to operate and don't have complicated buttons or catch mechanisms. They can be operated from inside of the house using a safe, simple lever.
The hinges are made in the UK by Cotswold and come complete with a child safety limiter for use throughout the day which can be turned off with a hidden button, giving you peace of thought that your children will not accidentally open the window too far. They are available in 13mm and 17mm stack heights.
Take a measurement of the length of the side-hung window hinge, which is fixed to the frame. (See the guide on measuring the size of Upvc window hinges). Select the proper size hinge from the choices below.
Be aware that the measurement is taken from the component that attaches to the frame not the sash. The real hinge length may be shorter or longer based on the manufacture of your old windows. When deciding on the width of the hinge, most frames made of upvc will have the 13mm stack height however if your original window frame has 17mm, then select this option. Alternatively you can fit the 4mm packer to make up for the difference. All hinges are in two different directions (1 left and one right). Screws aren't included with the hinges. If needed, they can be purchased separately. We recommend using our upvc window hinge repair screws. They are specifically designed to enhance the performance of your hinges, allowing them to operate efficiently for a longer. They feature a less friction design, and an improved weather seal, with a brand new nylon reducer cap.
Restricted Hinge
Standard hinges can make it difficult to open windows completely. These child safety hinges are a solution to this issue and provide a solution when ventilation is required but access to clean up or escape in the event of fire isn't possible. They function by limiting the amount of sash that can open, and allow for the control of this limitation with an option. They are available in 13mm and 17mm stack heights and can be used to open both side and top hung windows.
The Nico Restricted Egress Friction Hinges combine the features of both a standard restrictor and an escape pivot to offer a simple and efficient method of complying with building regulations. It is suitable for side hung and top opening uPVC windows and comes in 13mm and 17mm stack heights. It is supplied as a pair where one hinge is the restricted egress and the other unrestricted allowing one of these to be fitted on the bottom of the sash whilst the other is attached to the top.
These uPVC restrictive hinges have been tested to BS6375, part 2 and are designed for use on a window that isn't able to be fully opened, like a small child's bedroom. The mechanism limits how far the sash opens up to 100mm in a safe distance, and re-engages once the window is closed.
Like the other types of uPVC friction hinges they can be installed on all styles of windows and are perfect for difficult to reach windows above the ground level three-storey flats and those that would normally require a ladder to reach them. They can be combined with our range of security enhancements like hinge guards and protection plates, or dog bolts to provide PAS 24 performance.
When replacing a window hinge it is essential to measure the length of the existing hinge so you can order replacements that match in size. The easiest method to do this is by viewing the hinge in the image gallery and working out where you want it to be. Top hung hinges are restricted on both sides, while side-hung hinges are only restricted on one side.
Standard Hinge
Standard hinges feature metal-to-metal contacts and do not require any additional components to reduce friction. It is available in a variety of finishes and also has an NFPA-certified fire rating. To quickly determine the radius of hinges, lay them out flat and place a quarter and dime in two corners. If the dime is more snug and the corner is round by 1/4 inch. If the quarter fits better, it's rounded to 5/8 inch.
Choosing the right type of hinge can determine the success or failure of your composite door hinge replacement's appearance. Achieving the same design and style of your hinges to your door will give it an attractive and cohesive look.