15 Facts Your Boss Wished You d Known About Repairs To Upvc Windows

Repairs to uPVC Windows

upvc window repairs near me is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall onto the fabric rather than on the floor, where they could be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your property until a professional is able to repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. As time passes, they may be affected by a variety of issues such as sliding. A window repair that is sagging can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll need to open the window so that you can access the frame. Then, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window repair near me to check the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and perform a test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is crucial to act if you get up each morning to find mouldy walls and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the issue the caulking that was used up may require removal before a new layer is applied. When it comes to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed glass it is more likely the issue is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze it could be the hinges that are at the fault. They can be repaired by any skilled DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are happy to provide advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear may become displaced, which can cause a gap to form where the sash joins the frame. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock may be unbalanced. It is located on the hinge side and might require to be cleaned. In some instances it is possible to replace them.

The next common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window repair with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the risk of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be placed on the top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually wear out and it is cheaper to replace them instead of fixing them. If you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.