10 Things We Are Hating About Replacing A Window Handle

Tips For Replacing a Window Handle

It is simple to change your window handle in the at-home comforts of your home. Follow these handy tips for a smooth operation and great looking finish.

Start by removing the screws to expose the screws inside the uPVC window handle. Measure the spindle's length to ensure you get the correct size replacement.

1. Measure the Spindle Length

When you're replacing a window handle, it's important to get the size of the spindle correct. It can influence the tightness or looseness of the handle, as well as whether the handle will lock correctly into the frame of the window. The spindle is a metal shaft that connects the handle to the lock on the window frame. The spindle can be either a standard industry 8mm cross-section or the earlier 9mm versions. Modern industry standards are 8mm, but it wasn't always this way. It is important to verify the measurements prior to buying a new handle.

Remove the handle. This is done by turning the handle into the open position and unwinding two screws that hold the handle in place (which are often hidden behind plastic caps that will need to removed). Once the handle has been removed, measure the distance from the base to the point at which it ends. This will give you the measurements needed to buy a new one.

There are a lot of options to consider when choosing the right window handle from sleek chrome that fits in with a modern home, to traditional burnished brass that looks wonderful in restored Georgian rooms, or even the more traditional Tudor cottages with curled monkey tail locks! There are many options, but the most important is to choose a style that matches your home's decor.

Espag handles are commonly used to uPVC window frames and are always the exact same size with a 43mm central. Cockspur handles can vary from 58mm to 62mm but there are replacements for both sizes. Window handles made of Cadenza have distinct dimensions because they have an angled blade which operates the multi-point lock mechanism within the window.

Another consideration when selecting the best window handle is knowing what hand you will need to use. This is determined by what hand you use to open the sliding door handles. Inline espag handles can be used with either left or right-handed windows. Cranked window handles are handed and are only used on windows that open in one direction.

2. Remove the Handle

Whether the handle is damaged or simply worn out, a window handle that falls off can be a real pain. The good news is that you can repair a uPVC handle by yourself. All you need are some basic tools and a bit of time to complete the task.

You will need to first open the window and ensure that it is not locked. The next step is to remove the screw caps which hold the handle in position. Once the screw caps are removed you will be able to take off the handle.

The handle is attached to a spindle within the window frame. The handle is fixed by either a screw or pin according to the type of handle. The most popular handles are the inline Espagnolette and the cockspur handles. Both these types of handles are used on casement windows, which includes windows made of aluminium. They can be locked with a key to prevent unauthorised opening of the window from the outside or you can lock them by turning the handle clockwise.

To remove the handle, you will need to use a screwdriver with a flat blade to release the clip holding the handle in place. When this clip is released the handle will fall off the spindle. When the handle is removed, you'll need to measure the length of the spindle and ensure that your new handle is compatible with this size.

Once you've determined the proper size for the handle, screw it in the correct position. You must ensure that the new handle is firmly secured and that it is turning in the correct direction (clockwise for open and counterclockwise for closed). It is important to make sure that the handle has not been installed upside down.

In the end, you must replace the screw cap caps. After you have completed this step, you can test the handle to make sure it is working correctly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked one and back.

3. Take the Screws off

A uPVC handle is a crucial element of any home and is the first thing to show signs of wear or damage. This can be due to natural causes, frequent use, or even damage caused by criminals trying to gain access to your home. But, a simple fix is a simple solution and stop the issue from recurring.

uPVC handles may also be difficult to remove if the Locking Window Handles mechanisms are not functioning properly. Most of the time, the issue is solved by replacing the multipoint lock rather than the entire handle. It's worthwhile to check this out since it can save you money.

After you have removed the handle, you'll need to remove any screws that were holding it in place. They are usually located on the inside face of the handle base. It is possible to use a screwdriver accomplish this. Be cautious not to over tighten the bi-fold doors handle as this could cause it to loosen.

You'll then have to locate the fixing pins or screws that hold the new handle in place. Again these are likely to be found on the inside of the base of the handle and you'll need a screwdriver or a pair of pliers in order to remove them. If you'd like to replace them, you can do so by replacing the caps on the screws and check the handle to ensure it works correctly.

When you're ready for installing the new handle, simply line up the spindle with the cut out in the window mechanism and screw in the appropriate position. Make sure the handle is in an open position and that any screws are securely secured prior to replacing the screws' covers should you wish to do this. Then you can enjoy the new window handle. Hopefully this will help you to avoid the need for expensive window and conservatory door handles replacement services in the future. If you would like more help in this, or any other aspect of your uPVC windows, don't hesitate to contact us.

4. Fit the New Handle

The procedure of replacing a damaged window handle or updating it is easy and can be completed within just a few steps. The first step is to determine the kind of handle, determine its spindle, and determine what tools you'll require to complete the task. Safety is always the primary priority when working with windows and tools. Take your time to follow the steps and ensure that you have a handle that is safe to use.

To begin, find the screws that hold your window handle in place. Remove them while firmly holding the handle to stop it from falling down and causing injury. Once the screws are removed, you can put them in a secure location to be replaced later.

After you have removed the handle, you are now able to install your new one. The handle needs to be a perfect fit to function properly and secure the window in its closed position. Next you need to slide the square metal bar attached to the handle into the hole for the window mechanism.

The last step is to replace the caps on the screws and test the handle to ensure that it is working. If you aren't satisfied with the results, or if your window does not shut or open properly, call our experts for help.

Almost all UK homes have uPVC Windows. As such, many will need to be changed at some point because of damage or wear. Anyone with a bit of DIY expertise can carry out the process. It is crucial that the handle you select is in line with the style and size of your window. If you're unsure about what type of handle you require, don't hesitate to reach out to our team, who can provide you with the choices available.