10 Things Everybody Gets Wrong About The Word "Ghost Immobiliser Problems."

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your prized item from theft. This system is discrete and does not require any additional key fobs.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence up to 20 presses long. This will then authorize the vehicle to start.

Simple PIN Code Change Process

With the increasing rate of vehicle theft, a lot of owners are looking to improve their security. There are a myriad of security devices that are sold aftermarket, from tracking systems to immobilisers and alarms. However, not all of these are equally effective in protecting your car. A tracking device can aid in finding your vehicle in the event of it being stolen however, it won't prevent the crime. Immobilisers, on the contrary perform exactly as they state on the tin: they disable your car's motor so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your vehicle.

The ghost immobilise device uses the buttons on your car to generate a unique sequence which must be entered in order for the engine to start. This can be done using the heater, window or indicator stalk buttons. Additionally it is possible to use an app on mobile that can function as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This feature is particularly beneficial if you have to surrender your car to a valet service or parking, as the immobiliser is activated, but not disabled.

The Ghost is an innovative and unique device that works by using the buttons on your vehicle rather than as a standalone device. It is not only an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you may own. This makes it a better investment than a conventional wheel lock.

Weatherproof tiny device

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your pride & joy from key hacking and cloning. It also stops ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for extra wiring, and has been thoroughly tested to ensure it works with all vehicles. It is also indestructible to jamming devices, which is an approach used frequently by thieves to get around existing immobilisers.

The benefit of using CAN data is that it operates silently when compared to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, centre console, or doors, to create a unique disarming sequence. The sequence can be extended 20 or more presses for additional security. The iPhone app only allows one connection, using an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost installation near me prevents car thieves adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine will only start when a valid PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or for servicing without the need to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from starting up normally until you enter a specific code. The system can be activated or deactivated through your smartphone's app without the need for additional wires.

The factory-installed immobilisers function by using a transponder that is integrated into the key. This transmits a signal to the ECU. The car will start if the correct code is sent. If, however, the transponder from a different vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser was created by an South African company at the top of the line in vehicle security technology. It safeguards your vehicle from key cloning, hacking and even key theft. The only way a thief could take your car is by physically towing it away and even then they wouldn't be allowed to drive it.

local ghost installer makes use of the buttons on your vehicle, including the indicator stalk, steering wheel and door panels to create an individual PIN code that is changeable that needs to be entered before you are able to use your car. This is not required to use extra hardware such as keys-fobs, and can last up to 20 presses long. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to identify that the system has been set up.

ghost immobiliser install is more difficult to get rid of than car alarms that require disarming with the buttons. This makes it a great supplement to a GPS tracker that can assist in locating your car after it's been taken.

Emergency PIN code override

You don't have to look very long on social media sites to find stories or videos of vehicles that were stolen using the latest technology tools. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.

The ghost immobiliser problems immobiliser helps combat this issue and offers an additional layer of security to prevent your vehicle from being taken if it is targeted by thieves. It creates an individual pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the centre console. The unique pin code must be entered along with your original key fob to stop the vehicle from getting started. The unique override pin can be found on the black card you will receive after installation. It is simple to remember as there are no LED indicators.

The device is hidden in the vehicle's wires and does not emit radio signals, which means it can't be detected by modern thieves using diagnostic software that can identify the security system you have installed. This makes it an excellent alternative to a tracking device.

Contrary to other security systems which rely on a relay in the engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker with these systems, however this must be stated prior to the installation of the device. They are also fully service/valet-mode compatible and are a great alternative to a tracker having your car in for an electrical fault at the dealership.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. With the ease of access to key cloning equipment and door lock pick sets, it is now much easier for thieves to steal your joy and pride. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent because it does not utilize radio frequencies or key fobs. This means it isn't detected by diagnostics or other car hacking devices. It also protects you from adding the new ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden within your car by using buttons on the steering wheel, the centre console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits must be entered prior to being able to start your car.

This is the first aftermarket CAN-bus immobiliser that has been created. It can prevent your vehicle from being started or driven if you don't enter a PIN code first. If you're driving away with the device in motion the indicator will flash on your dashboard which will flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN at this point the indicator will continue to flash and require a new PIN code every time you try to start your car.