10 Saab 9-3 Key Replacement Tricks All Experts Recommend

From MineFortress Wiki
Jump to navigation Jump to search

How to Replace the Replacement Key Battery For the Saab 9-3

saab 9-3 key fob replacement owners have to follow a series of unique steps to add an additional ignition key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then a new key and transponder need to be bought and programmed to the car.

Rotate your keys to prevent one from wearing out more than the next. This will help keep your keys in top condition.

Replacement Case

Contrary to the classic Saab keys of old, the new key fobs are equipped with electronics which makes it more difficult to create a duplicate. This has made stealing cars considerably more difficult than it was years ago. It has also made it more expensive to replace keys lost.

Every owner of a Saab 9-3 must have at minimum two working keys. If one gets lost, it costs a fortune to purchase a new one for the car because it involves replacing the CIM module and programming the locking cylinders. Dealers usually charge between $100-$200 to do this.

There are ways to reduce these costs. Some parts providers will use the code of an old key to cut a brand new metal blade for less than the price of the dealer. The key must be the exact same as the original to allow it to work in your vehicle.

Follow these steps to replace the case. You will need to have an open-faced screwdriver and patience. With the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. Once you have the case open, remove the electronic components and put them in your new case. Make sure you insert the correct key and badge inside the case.

Replacement Battery

The saab key battery 9-3 replacement saab car keys battery is a low-cost part that can be quickly and easily replaced. This YouTube video from Cyclone Cyd shows how to open a saab 93 without A key to replace the remote fob battery with only four steps. This tutorial can be used for any modern saab key fob, however the procedure might differ slightly.

The first step is to locate the button that releases the backup key within the fob. This button is typically located on the back of the fob close to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole in this button. This should be enough to allow you to open the fob case so that you can change the battery.

Once you have installed the new battery CR1632, you are able to rebuild the remote key fob. You can then program it into your car. The entire process should take no more than an hour or less. It is a simple procedure that doesn't require any special equipment.

If you lose a key, the process will be slightly more complicated, but it can still be done. The dealer must read the car's VIN and then request a replacement key blade and TWICE module that has the correct unique code. The dealer will then need to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob has a battery that is used to lock and unlock your vehicle. Batteries are able to last for a short time and eventually die. It's a common issue in all vehicles. The good thing is that you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronics in place. You can simply open the case and replace the batteries. It's important to note that you'll have to remove the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot found in the middle of the case. The case will split once you work the screwdriver all around it.

If you're ready to replace your keys, keep a spare in your possession. This will save you lots of money. If you have a spare you can ask the dealer to cut a new key and program it to the car, which is cheaper than replacing the whole key fob.

If you don't have a spare, it is possible to add a second key to your car, however it requires a lot of research and effort. It can cost a few hundred dollars to get an additional car key. The computer in the car also needs to be programmed. This can be done by a professional, but it's an expensive option for the majority of owners.

Replacement Ignition

The modern SAAB 9-3 has an alarm system that is more sophisticated built on a keycode. This means that if you lose your only working key, replacing it with another key can be extremely expensive as the car has to have a unique computer module fitted and also needs to be specifically programmed to accept an additional key. Most locksmiths can't do this or even dealers can charge several hundred dollars just to program the new key!

Dealers will charge you a high price to replace your car's computer (also known as the CIM or SAAB twice) when you lose your only functioning key. Instead, we can reprogram the EEPROM on your existing car computer to make it ready for a new key, slashing over 50% of what you'll be charged at a dealership.

If you have owned a SAAB 9-3 many years and you're aware of the ignition keys aren't very durable. If your ignition key is not working properly, you should look into replacing it. They can become sticky and the buttons can fall off. Luckily, replacing the ignition key isn't as complicated as it sounds and can be done in a short time using the proper tools.