What Experts In The Field Want You To Know

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of unique steps to add an additional ignition key. This requires the use of a handheld computer called Tech-2 which is to be used by the dealer. Then, a new transponder and key need to be purchased.

Change your keys regularly to prevent one from wearing out quicker than the other. This will keep your keys in good condition.

Replacement Case

The new key fobs do not look like the old Saab keys. They are equipped with electronics which make it hard to duplicate. This has made car theft considerably more difficult than it was years ago. It has also made it more costly to replace keys that were lost.

Every owner of a 9-3 Saab should have at least two functioning keys. It is expensive to replace a lost key, as it requires replacing the CIM module, and programming the locking cylinders. Dealers will typically charge $100-$200 to complete this.

There are several ways to get around these high cost. Some parts providers will search for the code on an extra key (usually the same one that opens the doors and switches the ignition) and cut a brand new key blade from metal for only a fraction of the dealer's cost. The key must be exactly the same as the original to allow it to work in your vehicle.

Follow these steps to replace the case. You will need an flathead screwdriver and patience. With the screwdriver, break off the plastic and then remove the emergency key. Once you have the case open, remove the electronics and place them inside the new case. Make sure you insert the correct key and badge into the case.

Replacement Battery

The Saab 9-3 replacement battery is a low-cost part that can be quickly and easily replaced. This YouTube video from Cyclone Cyd shows how to replace the remote fob battery with only four steps. This tutorial is compatible with any modern Saab key fob. However, the process may differ slightly.

The button is typically located next to the Saab logo on the back of the fob. This button is usually on the back of the fob just below the saab 9-3 key fob replacement Logo. Then, use an screwdriver with a flat head to insert into the small hole in this button. This will allow you to open the fob's case to allow you to replace the battery.

Once you have installed the CR1632 batteries, you can restore your remote key fob. You can then program it into your car. The entire process shouldn't exceed an hour. This is a straightforward procedure that doesn't require special tools.

If you lose a key the procedure will be more complicated but it is still able to be completed. The dealer needs to first determine the VIN of the vehicle and then order the replacement TWICE module as well as key blade with the proper unique code. Then, they'll be required to cut the replacement saab 9-3 key key and then program it using a brand new tool for programming called MDI.

Key Replacement Fob

The key fob is the piece that locks and unlocks your car, it has a battery inside. Batteries are able to last for a short time and will eventually fail. This is a problem that happens with all cars, and the good news is that you can replace the batteries in a majority of key fobs and not have to replace the entire case. Amazon sells replacement fobs that have all the electronic components installed. It is easy to open the case and replace the batteries. It's important to note that you'll have to remove the emergency key first. you can accomplish this by inserting a small flathead screwdriver into the slot located in the middle of the case. Use the screwdriver to move around the case until it will split open, making it easier to remove.

When you are ready to replace the keys, make sure you have a spare since this will cut down your total cost by a substantial amount. If you have an extra key, you can ask the dealer to cut it and program it for your car. This is much cheaper than purchasing a new fob.

It is possible to add another key to your vehicle in the event that you don't have one, but it will require lots of research and work. A second key can cost about a few hundred dollars and also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

As opposed to earlier saab key code vehicles, the latest SAAB 9-3 models feature an upgraded alarm system that is built on a key code. This means that should you lose only one working key, replacing it with another one could be very expensive because the car needs to have a computer module installed, and it also needs to be specifically programmed to accept an extra key. Most locksmiths cannot do this, and even a dealer will charge several hundred dollars to program the new key!

If you've lost the only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge you the highest price for it. We can reprogram the existing EEPROM on your car's computer so that it's ready for an additional key. This will save you more than 50% off the cost you would spend at a dealer.

If you've owned a 9-3 from SAAB for quite a while, you know that the ignition keys aren't very durable. They can be extremely sticky and the buttons are known to fall off of them every now and then which is why you should think about purchasing a new one if yours isn't working as it should. It's not as difficult as it seems to replace the ignition key. With the appropriate tools, it could be accomplished in a short time.