15 Things Your Boss Would Like You To Know You Knew About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. However, if you have double-pane windows that are held in place by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need to source some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

If you're planning to attempt to remove the window panes by yourself it is important to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is large, you might need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to open the windows to reach the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close the window and perform an initial test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk can be put on. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double glazed window repairs-glazed glass it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens with the breeze. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side hung upvc window repair windows that use hinges and, like all mechanical parts, they can wear down over time. It is very easy to replace a hinge on a window however it is easier if someone helps hold the frame.

Verify that the uPVC hinges are closed and open in the right direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or by poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer advice.

It is also crucial to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. First, the hinges because of wear and tear, can become misaligned, this will cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge of the window and can also be misaligned, and again it's feasible to give them a good clean, but in some cases it might be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes that are filled with some kind of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a life span and they may reach an point at which it is more efficient to replace them than repair them. If you have any problems with your Upvc window repairs, it's best to consult an expert as soon as you can.