The Ultimate Guide To Saab 93 Key Fob

How to Replace a saab 9-3 key replacement 9-3 Key

The Saab 9-3 is a fantastic car that provides a lot of driver appeal. It is a powerful engine with excellent visibility. It also has a top safety rating.

However, it is crucial to make sure that you have at the very least two keys working for your car. If you lose one key, it could be very costly to buy a new one.

How to Replace the Ignition Key in a Saab9-3

If your car key won't engage in the ignition it is time to replace it. This guide will teach you how to replace the ignition key on the saab 9-5 key replacement 9-3. You will need a replacement key with a reprogrammable battery and a new key-fob cover.

Contrary to earlier models, modern Saab vehicles use a transponder on the key-fob instead physical key that can be used to unlock and start the car. The reprogrammable batteries that are in the key-fob inevitably get worn out, and eventually aren't able to hold any charge. This is particularly true if you keep using the same key in the same lock.

A professional locksmith can change the battery quite easily. You can also do it yourself if you have the proper tools and a bit of patience. The first step involves separating the key-fob. This is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. You will need to take your time, as the plastic is extremely thin and easily damaged.

When the case is opened then you can prepare the new key by combining the lower half of the old key and the banana and transponder on the new key. This will ensure that the new key is mated to the CIM correctly, which could make all the difference when replacing the primary key for your saab keys 9-3.

How to Replace the Ignition Key on the Saab 900

If you don't have two keys, you'll have to remove the dashboard and steering wheel to access the ignition. Start by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove all the trim pieces as well as dashboard pieces that surround the steering wheel. Once the dash is removed, you can insert a screwdriver in the opening behind the ignition switch.

The ignition cylinder is equipped with a key lock, which can prevent the vehicle from starting if you don't have the key in it. If the ignition switch on your 900 isn't working properly, you should check whether the key is in the lock or is stuck in the barrel of ignition. It is also recommended to rotate your keys and keep them clean to avoid bending.

Saab fob key replacement cars differ from other vehicles because they do not have traditional metal keys. Instead, the car is able to recognize electric signals generated by the key fob using the use of a specific microchip.

If you lose only one working key fob, the dealer will charge you the most expensive dollar to replace your computer module (known as the CIM). However, we can reprogram the existing computer's EEPROM and set it to accept new keys without replacing it. This can save you more than 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Find out more information about it here!

How to replace the ignition Key on a Saab 9-5

The metal part of a traditional Saab key is easy to copy, and also not much of an impediment against theft of a vehicle. The real protection comes from the electronic part in the key-fob, which has a chip inside that can recognize your vehicle when it's inserted into the ignition switch.

Saab's anti-theft system has relied upon this technology for over a decade. It's not as effective as an actual lock on the door however it makes the theft of your car much harder. Every Saab owner should keep a spare saab keys key in their car.

The majority of new Saabs come with two keys in the factory, however you can add more at an agent using a handheld computer, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is NG 9-3 vehicles, which come with more modern and advanced features that require a separate key-fob to use a different method of operation.

The dealer will replace the CIM or TWICE module on those cars if the keys are lost, and they'll charge you a high price to do it. But we can reprogram the EEPROM in your existing computer and make it accept new keys, without replacing the expensive modules.

How do you replace the ignition Key in an XC90 Saab

It's probably time to replace your SAAB key fob if you are experiencing issues turning the barrel of the lock. The process is simple and you don't even need to go to a dealership. You can do it at home, using a couple of simple tools.

It is first necessary to prepare the keys for your new car. Before starting, make sure that the anti-theft feature is disabled by placing blocks on your rear wheels and releasing the handbrake. Next, insert the key into the ignition and turn it to the ON position, which activates the accessories, but it doesn't start the engine. Repeat this procedure five times and leave the key in the on position.

Then you'll need to buy an additional case for your key fob. They can be found at a variety of auto parts stores and are usually quite affordable. Depending on the model, you could even get them without any electronic components.

To open the case simply push the flathead screwdriver into the slot in the middle. The case will split easily, and once you've done that, you'll have access to the internal electronics. Use a flathead screwdriver to gently remove the electronic components.